双参数非线性概率模型的板材腐蚀精度估计
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB52 + 8 TH712

基金项目:

国家自然科学基金(62241107)、辽宁省自然科学基金(2022-BS-180)、辽宁省教育厅面上项目(LJKMZ20220474, LJKZ0135)资助


Estimation of corrosion accuracy of plates based on two parameter nonlinear probability model
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对金属板腐蚀在线超声动态检测时探头抖动致使超声波入射角变化,引起测量精度低的问题,建立双参数超声波水 浸检测误差修正的非线性概率模型,结合函数逼近理论补偿超声入射角引入误差。 采用基函数加权组合与三阶拉格朗日插值 结合方法,同时对超声波入射角、界面声程双参数与工件声程的函数关系进行最小二乘曲线拟合,得出入射角与检测误差的非 线性相关关系。 通过对误差补偿算法中非线性概率模型入射角与界面声程变量的迭代运算,利用折射角反向求解入射角,解决 检测中超声波入射角不确定问题。 在水层厚度 30~ 45 mm 范围内,对不同厚度铝板进行检测,结果表明,经模型补偿处理,超声 波以 0° ~ 8°角入射,板材检测精度为 1% ,为有效提高腐蚀精度估计提供依据。

    Abstract:

    In view of the change of ultrasonic incidence angle caused by the online ultrasonic dynamic detection and the low measurement accuracy, a nonlinear probability model of two-parameter ultrasonic flooding detection error correction is formulated. The error introduced by ultrasonic incident angle is compensated by the function approximation theory. Using the combination of basis function and third-order Lagrange interpolation, the ultrasonic incidence angle and the nonlinear correlation between the incident angle and the detection error are obtained. The incident angle of the nonlinear probability model and the ultrasonic distance are iteratively calculated. The incidence angle is used to solve the refractive angle in reverse, and the uncertainty of the ultrasonic incidence angle in the detection is resolved. In the range of 30 to 45 mm, the results show that after the model compensation treatment, the ultrasonic wave at 0° ~ 8° angles of the incident, the plate detection accuracy is 1% , which provides a basis for effectively improving the corrosion accuracy estimation.

    参考文献
    相似文献
    引证文献
引用本文

邢燕好,姜晓霞,张 佳,孙 盈,赵 璐.双参数非线性概率模型的板材腐蚀精度估计[J].仪器仪表学报,2023,44(5):278-287

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-08-17
  • 出版日期: