基于改进多路径匹配追踪的芯片超声信号去噪方法
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TH89

基金项目:

中国博士后科学基金(2021T140279)、国家自然科学基金(51705203)项目资助


Denoising method of chip ultrasonic detection signals based on the improved multipath matching pursuit
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对高频超声检测倒装焊芯片微缺陷的回波信号受噪声影响的问题,提出了一种基于改进多路径匹配追踪算法 (MMP)的高频超声信号稀疏去噪方法。 利用 MMP 算法获取全局最优的原子,针对 MMP 计算量过大的问题,在迭代过程中设 置阈值和引入剪枝操作,筛选误差较大的路径,减少迭代路径,降低算法复杂度。 为了避免字典维度上升导致的计算量过大,通 过构建连续原子库对重构信号参数进行调整,最终实现芯片超声检测信号噪声的抑制。 通过仿真和实验证明,提出的方法能够 有效的去除倒装芯片高频超声检测信号中的噪音,与其他去噪算法相比,所提方法通过增加少量的计算,实现信号重构精度的 提高,提升了 B 扫图的清晰度。

    Abstract:

    To reduce the influence of noise on the high frequency ultrasonic detection of flip chip defects, a sparse denoising method of high-frequency ultrasound signals based on the multipath matching pursuit (MMP) is proposed. The MMP algorithm is used to obtain the atoms which are globally optimal. Aiming at the excessive calculation of MMP, the setting thresholds and the introducing pruning operations during iteration are introduced. To avoid the excessive calculation amount caused by the increase of the dictionary dimension, the contiguous atom dictionary is established to adjust the reconstructed signals and realize the noise suppression. Proved by simulation and experiment, the proposed method can effectively remove the noise in high-frequency ultrasonic detection signals of flip chip. Compared with MMP, the proposed method can improve the signal reconstruction accuracy and the clarity of B-scan by adding a small amount of computation.

    参考文献
    相似文献
    引证文献
引用本文

李 可,王 翀,明雪飞,顾杰斐,宿 磊.基于改进多路径匹配追踪的芯片超声信号去噪方法[J].仪器仪表学报,2023,44(1):93-100

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-07-04
  • 出版日期: