GPS框架下测量不确定度评估方法研究综述
DOI:
CSTR:
作者:
作者单位:

1.中国计量大学计量测试与仪器学院杭州310018;2.中机研标准技术研究院(北京)有限公司北京101407; 3.中国计量科学研究院几何量计量科学研究所北京100029

作者简介:

通讯作者:

中图分类号:

TB92;TN98

基金项目:

国家自然科学基金(U24A20134,51275148)项目资助


Review of evaluation methods of measurement uncertainty within the framework of GPS
Author:
Affiliation:

1.School of Metrology Measurement and Instrument, China Jiliang University, Hangzhou 310018,China; 2.China Machinery Institute of Standards and Technology (Beijing) Co., Ltd., Beijing 101407,China; 3.Institute of Geometrical Metrology, National Institute of Metrology, Beijing 100029,China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    随着精密制造与高端装备技术的发展,产品几何量测量对量值可靠性和合格性判定一致性的要求不断提高,测量不确定度已成为产品几何技术规范(geometrical product specifications,GPS)体系中的关键计量参数。GPS框架将测量不确定度显式纳入几何验证与符合性判定过程,使其不仅用于表征测量结果可信度,同时参与误判风险控制与判定规则构建。由于不同测量系统在测量原理、误差机理及系统复杂度方面存在明显差异,不确定度评估方法在工程应用中呈现出显著的任务特定特征。围绕GPS框架下的测量不确定度评估问题,对相关理论基础、主要评估方法及典型测量系统中的研究进展进行了系统综述。依据误差传播实现方式及系统内部信息利用程度,将不确定度评估方法归纳为解析模型法、量值特性分析评估法以及基于数值仿真的蒙特卡洛(Monte Carlo)方法3类,并分析了不同方法在模型建立、误差传播能力及工程适用性方面的特点。在此基础上,以接触式坐标测量机、光学测量系统及X射线三维尺寸测量系统为典型对象,讨论了不同测量系统中的不确定度来源特征及评估方法适用性。研究表明,接触式坐标测量系统更适合采用基于显式误差传播的解析模型法与任务特定Monte Carlo方法;光学测量系统由于存在复杂非线性与对象相关误差,更依赖基于数值传播的灰箱式评估路径;工业CT测量系统则主要依赖虚拟CT与Monte Carlo仿真方法进行不确定度评估。相关研究为复杂几何测量任务中不确定度评估方法的合理选择提供了理论依据,对提高GPS框架下几何验证可靠性及降低合格性判定风险具有重要工程价值。

    Abstract:

    With the development of precision manufacturing and high-end equipment technology, the demand for the reliability of geometrical measurements and the consistency of conformity assessment has been continuously increasing. Measurement uncertainty has become a critical metrological parameter in the geometrical product specifications (GPS) system. The GPS framework explicitly incorporates measurement uncertainty into the geometrical verification and conformity assessment process, extending its role from merely characterizing the credibility of measurement results to participating in control of false acceptance/rejection risks and decision rule construction. However, due to significant differences in measurement principles, error mechanisms, and system complexity among different measurement systems, uncertainty evaluation methods exhibit pronounced task-specific characteristics in engineering applications, and a unified understanding of their applicability is still lacking. This paper presents a systematic review of the theoretical foundations, main evaluation methods, and research progress of measurement uncertainty within the GPS framework. According to the implementation mode of error propagation and the degree of internal system information accessibility, uncertainty evaluation methods are classified into three categories: analytical model methods, measurand characteristic analysis evaluation methods, and numerical simulation-based Monte Carlo methods. Their characteristics and limitations in model construction, error propagation performance, and practical implementation are analyzed in detail. On this basis, coordinate measuring machines (CMMs), optical measurement systems, and X-ray computed tomography (CT) dimensional measurement systems are selected as typical objects to discuss the uncertainty source characteristics and the applicability of evaluation methods in different measurement systems.The results show that contact coordinate measurement systems are more suitable for analytical model methods based on explicit error propagation and task-specific Monte Carlo methods. Optical measurement systems, due to complex nonlinearities and object-dependent errors, rely more on gray-box evaluation paths based on numerical propagation. Industrial CT measurement systems mainly depend on virtual CT and Monte Carlo simulation methods for uncertainty evaluation. The applicability of uncertainty evaluation methods under the GPS framework fundamentally depends on the transparency of the measurement system and the complexity of the measurement task. This review provides a theoretical basis for the rational selection of uncertainty evaluation methods in complex geometrical measurement tasks, and has important engineering value for improving the reliability of geometrical verification and reducing conformity assessment risks under the GPS framework.

    参考文献
    相似文献
    引证文献
引用本文

刘航肖,朱悦,罗哉,位恒政,何亚雄,程银宝. GPS框架下测量不确定度评估方法研究综述[J].电子测量与仪器学报,2026,40(9):1-12

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-11-13
  • 出版日期:
文章二维码
×
《电子测量与仪器学报》
关于防范虚假编辑部邮件的郑重公告