Abstract:With the rapid development of the integrated circuit industry, the number of chip pins and internal signals is continuously increasing. Traditional single-channel architectures can no longer meet the test challenges of large-scale concurrent measurements, and the requirements for collaborative testing and timing precision of multi-channel signals are becoming increasingly stringent. To address the high-precision measurement demands in automatic test equipment (ATE), a multi-channel, high-precision time-to-digital converter (TDC) measurement system is proposed. This system utilizes a field programmable gate array (FPGA) as the core control unit, integrating dedicated high-precision TDC chips to construct a heterogeneous time interval measurement architecture. A low-jitter clock generator is employed to provide multiple phase-aligned synchronous clock signals, establishing a precise global homologous reference time base to achieve rigorous synchronization across multi-channel TDCs. In the designed system, the eight-channel input signals are first processed by high-speed comparators for level conditioning to generate TDC trigger signals. These signals, together with the synchronous clock, serve as the measurement inputs for the TDCs. By independently measuring the absolute time interval between each channel and the synchronization signal, the system subsequently calculates the high-resolution time intervals between any two arbitrary channels through backend digital logic. Experimental results demonstrate that, after calibration, the measurement precision is better than 13.4 ps for dual-channel operation, and the inter-channel measurement precision is better than 21.79 ps during multi-channel concurrent operation.