数据受限条件下的深海多金属结核体积测量
DOI:
CSTR:
作者:
作者单位:

1.山东科技大学电子信息工程学院青岛266590;2.山东科技大学电气与自动化工程学院青岛266590; 3.自然资源部第二海洋研究所杭州310012

作者简介:

通讯作者:

中图分类号:

TD807; TN98

基金项目:

国家重点研发计划(2022YFC2806602)项目资助


Volume measurement of deep-sea polymetallic nodules under data-limited conditions
Author:
Affiliation:

1.School of Electronic and Information Engineering, Shandong University of Science and Technology, Qingdao 266590, China; 2.School of Electrical Engineering and Automation, Shandong University of Science and Technology, Qingdao 266590, China; 3.Second Institute of Oceanography, MNR, Hangzhou 310012, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在深海环境中,海底多金属结核的三维形态获取面临诸多挑战:一方面,受限于深潜作业成本与成像条件,通常仅能获取俯视图像,导致观测信息严重受限;另一方面,真实三维扫描数据稀缺,难以支持深度学习模型的训练。为此,提出一种基于单视图的深海多金属结核三维重建与体积估算方法。首先,针对训练数据不足的问题,利用3D建模软件Blender构建了包含800个合成样本的三维数据集PMN800,涵盖多金属结核的多种形态与纹理特征。随后,采用SyncDreamer扩散模型,在单视图输入条件下生成多视角一致图像,利用神经重建框架NeuS将多视图合成为高保真的三维网格模型。最终,基于三角剖分方法实现体积估算。利用合成数据进行辅助训练,针对真实的多金属结核进行测试。所提方法在多视图一致性评价中峰值信噪比(peak signal-to-noise ratio,PSNR)相比原始模型提升26.7%;在主观质量评估中,保真性和一致性得分分别提高0.95与1.20,整体性能优于现有主流算法。体积测量实验结果显示,在合成数据集与真实深海多金属结核数据上的平均相对误差分别为7.65%与9.41%,验证了该方法在多金属结核体积测量中的有效性与可靠性。

    Abstract:

    In deep-sea environments, acquiring the three-dimensional (3D) morphology of seafloor polymetallic nodules faces numerous challenges: On one hand, constrained by the high costs of deep-sea diving operations and imaging conditions, typically only top-down (overhead) images can be obtained, resulting in severely limited observational information. On the other hand, the scarcity of real 3D scanned data makes it difficult to support the training of deep learning models. To address these issues, this paper proposes a single-view-based method for 3D reconstruction and volume estimation of deep-sea polymetallic nodules. First, to tackle the problem of insufficient training data, a 3D dataset named PMN800 containing 800 synthetic samples was constructed using the 3D modeling software Blender, covering various morphologies and texture characteristics of polymetallic nodules. Subsequently, the SyncDreamer diffusion model is employed to generate multi-view consistent images from single-view inputs. The neural reconstruction framework NeuS is then utilized to fuse these multi-view images into a high-fidelity 3D mesh model. Finally, volume estimation is achieved using a triangulationbased approach. Synthetic data are leveraged for auxiliary training, and the method is tested on real polymetallic nodules. In multi-view consistency evaluation, the proposed method demonstrates a 26.7% improvement in peak signal-to-noise ratio (PSNR) compared to the original model. In subjective quality assessment, fidelity and consistency scores increase by 0.95 and 1.20, respectively, with overall performance surpassing existing mainstream algorithms. Experimental results for volume measurement reveal average relative errors of 7.65% on the synthetic dataset and 9.41% on real deep-sea polymetallic nodule data, validating the method’s effectiveness and reliability in volume measurement of polymetallic nodules.

    参考文献
    相似文献
    引证文献
引用本文

张严梓,张晓林,赵猛,李怀明,滕升华.数据受限条件下的深海多金属结核体积测量[J].电子测量与仪器学报,2026,40(9):190-200

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-11-13
  • 出版日期:
文章二维码
×
《电子测量与仪器学报》
关于防范虚假编辑部邮件的郑重公告