合成孔径雷达高度计重跟踪算法与FPGA系统实现
DOI:
CSTR:
作者:
作者单位:

1.中国民航大学电子信息与自动化学院天津300300;2.中国工程物理研究院电子工程研究所绵阳621999; 3.佛山大学电子信息工程学院佛山528000

作者简介:

通讯作者:

中图分类号:

TN953;TN791

基金项目:

国家自然科学基金(62271487)项目资助


Synthetic aperture radar altimeter retracking algorithm and FPGA system implementation
Author:
Affiliation:

1.School of Electronic Information and Automation, Civil Aviation University of China, Tianjin 300300, China; 2.Institute of Electronic Engineering, China Academy of Engineering Physics, Mianyang 621999, China; 3.School of Electronic and Information Engineering, Foshan University, Foshan 528000, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    合成孔径雷达高度计(synthetic aperture radar altimeter,SARAL)作为遥感系统中获取地形高程信息的关键传感器,在复杂地形下的高程估计精度与实时处理性能面临挑战。针对传统最小二乘(least squares,LS)重跟踪方法易受噪声干扰、数值不稳定及空间不连续性影响的问题,提出一种基于层次贝叶斯的连续最大后验(maximum a posteriori,MAP)重跟踪方法,该方法基于布朗模型构建非线性观测表达,通过贝叶斯框架引入自然梯度下降机制,并融合具有自适应强度的拉普拉斯平滑先验与Gamma超先验,有效实现地形连续性建模。同时,通过对算法的梯度优化路径、采样策略与收敛判据进行了优化重构,建立了适于流水线调度、定点运算及资源复用的硬件映射方案,并在现场可编程门阵列(field programmable gate array,FPGA)平台完成端到端部署,利用AXI互联总线实现模块解耦和数据闭环。半实物仿真与实测数据验证表明,所提方法在高程估计精度、噪声抑制能力及空间连续性方面均优于LS与标准MAP方法,且FPGA实现资源占用低于30%,计算误差小于1×10-7,满足复杂地形条件下雷达高度计的实时应用需求。

    Abstract:

    Terrain elevation retrieval by synthetic aperture radar altimeters degrades in complicated terrain due to noise sensitivity, numerical instability, and spatial discontinuities in conventional least-squares retracking. A hierarchical Bayesian continuous maximum a posteriori retracking algorithm based on the Brown echo model is proposed, with accelerated convergence realized by natural-gradient descent optimization and terrain continuity enforced via adaptive Laplacian smoothing regularized by Gamma hyperprior. The optimization path, sampling strategy, and convergence criteria of the algorithm are tailored for a pipelined, fixed-point FPGA implementation with AXI interconnect. Hardware mapping exploits pipeline scheduling, fixed-point arithmetic, and reusable logic modules. Semi-physical simulation and measured data verification show that the proposed method is better than the traditional least squares and standard MAP methods in terms of elevation estimation accuracy, noise suppression ability and spatial continuity. The FPGA design occupies less than 30% of logic resources and maintains numerical errors below 1×10-7, meeting real-time processing requirements in challenging terrain. This approach addresses accuracy and real-time performance challenges.

    参考文献
    相似文献
    引证文献
引用本文

杨磊,胡尧,左盼盼,高翔,黄博,戴淦锷.合成孔径雷达高度计重跟踪算法与FPGA系统实现[J].电子测量与仪器学报,2026,40(9):126-138

复制
分享
相关视频

文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2026-11-13
  • 出版日期:
文章二维码
×
《电子测量与仪器学报》
关于防范虚假编辑部邮件的郑重公告