分布电感对石英晶体测试精度的影响及补偿
作者:
作者单位:

1. 北京信息科技大学仪器科学与光电工程学院北京100192;2. 北京市机电系统测控重点实验室北京100192

作者简介:

通讯作者:

中图分类号:

TM935.1

基金项目:


Effect andcompensation of distributed inductance on the test accuracy of quartz crystal
Author:
Affiliation:

1. School of Instrument Science and Optoelectronics Engineering, Beijing Information Science and Technology University,Beijing 100192,China; 2. Beijing Key Laboratory for Measurement and Control of Electromechanical Systems, Beijing 100192,China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    IEC推荐的石英晶体电参数的(网络零相位测试方法依赖于对测试环境的严格限制来保证其测试精度。在实际应用中,生产现场的测试环境将引入杂散电抗并严重影响其测试精度.为提高测量精度,根据石英晶体的电参模型和理想网络与实际网络模型的差异,理论和实验分析了分布电感对石英晶体谐振频率测试精度的影响,采用电容补偿的方法可以显著减小这一影响。实验结果表明,经过补偿后的石英晶体串联谐振频率的测量精度可达到±2×10-6。

    Abstract:

    The quartz crystalunittesting method of zero phase technique in a πnetworkrecommended by IEC relies on strict limits on test environment to ensure the test accuracy. In practical application, the test environment of production site will bring in stray reactance, which seriously affects the test accuracy. To improve test accuracy, according to the model of electrical parameter of quartz crystal as well as the difference between idealπnetwork and actualπnetwork model, the effect of distributed inductance on the test accuracy of resonance frequency of quartz crystal were explored based on theoretical analysis and experiments. The method of capacitance compensation could significantly reduce the effect. The experimental results show that the testing accuracy of series resonance frequency of quartz crystal could be up to ±2×10-6after compensation.

    参考文献
    相似文献
    引证文献
引用本文

李东,王艳林.分布电感对石英晶体测试精度的影响及补偿[J].电子测量与仪器学报,2017,31(3):487-491

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-07-20
  • 出版日期: