光流点匹配跟踪的薄壁件振动模态测试方法
作者:
作者单位:

湖南科技大学机械设备健康维护湖南省重点实验室湘潭411201

中图分类号:

TN911.73;TH113.1

基金项目:

国家自然科学基金(51205122,51605157)、湖南省研究生科研创新项目(CX2017B653)资助


Vibration modal measurement method for thinwalled parts using optical flow point matching and tracking
Author:
Affiliation:

Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment, Hunan University of Science and Technology, Xiangtan 411201, China

  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [20]
  • |
  • 相似文献
  • | | |
  • 文章评论
    摘要:

    针对传统模态测试方法存在获取信息有限和附加质量、已有非接触模态测试方法需进行复杂图像处理等问题,提出了光流点匹配跟踪的薄壁件振动模态测试方法,避免了需逐帧进行特征分割、提取等复杂的图像处理。首先,建立了面内振动视觉测量的成像模型,通过相机标定获取工业相机的内、外参数并进行了误差分析。研究了基于光流视觉测振的原理与方法,该方法通过单目相机采集带特征点的结构振动序列图像,运用金字塔的LucasKanada算法进行光流点匹配跟踪,进而获得亚像素级特征点的振动信息,在此基础上进行模态参数辨识获得模态参数。基于提出的方法搭建了薄壁件振动模态测试系统,对薄壁梁进行了振动模态测试实验,并与激振器扫频测试结果和有限元仿真结果进行了对比分析。实验结果表明,固有频率误差在5%以内,模态振型一致,从而验证了提出方法的正确性,为薄壁件的振动模态测试提供了新方法。

    Abstract:

    Aiming at overcoming the problems that the traditional modal testing methods have limited information and the transducer additional mass effects modal parameters, and existing noncontact modal testing method requires complex image processing, a vibration modal measurement method for thinwalled parts using optical flow point matching and tracking is proposed. It avoids complicated image processing such as feature segmentation and extraction and so on in each frame. Firstly, the model of vibration detection based on the inplane vision is developed. The intrinsic and extrinsic parameters of industrial camera are calibrated through the camera calibration board, and the errors are analyzed. The principle and the method of monocular vision vibration testing based on optical flow method are investigated. The vibrating sequence images of structure which has pasted feature points are captured with a monocular industrial camera. The pyramid LucasKanada algorithm is used for optical flow point matching and tracking, and to get the vibration information of each subpixel feature point. And then the modal parameters are obtained by modal parameter identification. Based on the proposed method, a thinwalled vibration modal testing system is built and the vibration modal testing experiments with the thinwalled beam is investigated, the testing results are compared and analyzed between that of a shaker testing and FEM simulation. The results show that the natural frequency errors are less than 5% and the corresponding vibration modes are the same, which verifies the correctness of the proposed method, so the proposed method provides a new way for the vibration modal testing of thinwalled parts.

    参考文献
    [1]戴美玲,徐向阳,杨福俊,等. 薄壁球壳受刚性平面压缩的连续变形测量[J]. 光学 精密工程,2016, 24(5): 9931000. DAI M L, XU X Y, YANG F J, et al. Measurementof continuous deformation of thinwalle spheres compressed by a rigid plate[J]. Optics and Precision Engineering, 2016, 24(5): 9931000.
    [2]SUN S, CHU S, CAO D. Vibration characteristics of thin rotating cylindrical shells with various boundary conditionns[J]. Journal of Sound and Vibration, 2012, 331(18): 41704186.
    [3]尹涛. 时域响应中传感器附加质量影响消除[J]. 振动与冲击,2016, 35(4): 2834. YIN T. Elimination of transducer additional mass effects in timedomain responses[J]. Journal of Vibration and Shock, 2016, 35(4), 2834.
    [4]刘晓军,王益民. 同步相移干涉表面精密测量[J]. 中国机械工程,2009, 20(18): 22182222. LIU X J, WANG Y M. A synchronism phase shifting interferometry for on line precision surface measurement[J]. China Mechanical Engineering, 2009, 20(18): 22182222.
    [5]覃斌. 单点激光连续扫描测振的薄壁件实验模态测试方法研究[D]. 湘潭:湖南科技大学,2013. QIN B. Research on experimental modal testing method for thinwalled parts using single point laser continuous scanning vibration measurement[D]. Xiangtan: Hunan University of Science and Technology, 2013.
    [6]刘立生,张合勇,王挺峰,等. 激光外差探测对振动目标多普勒频谱成像[J]. 光学 精密工程,2015, 23(6): 15081515. LIU L SH, ZHANG H Y, WANG T F, et al. Doppler spectrum imaging of vibrating target using laser heterodyne detection[J]. Optics and Precision Engineering, 2015, 23(6): 15081515.
    [7]GIERGIEL M, KOHUT P. Analysis of dynamics of vibratory machines applaying vision based measurements[J]. Mechanics & Mechanical Engineering, 2011, 15(4): 4351.
    [8]ROMASZKO M, SAPINSKI B, SIOMA A. Forced vibrations analysis of a cantilever beam using the visionmethod[J]. Journal of Theoretical & Applied Mechanics, 2015, 53(1): 243254.
    [9]CHEN J G, WADHWA N, CHA Y J,et al. Modal identification of simple structures with highspeed video using motion magnification[J]. Journal of Sound and Vibration, 2015,345(2015): 5871.
    [10]许畅,王聪,高晶波,等. 基于摄像测量法的在轨柔性结构模态参数辨识[J]. 哈尔滨工业大学学报,2014, 46(11): 1723. XU CH, WANG C, GAO J B, et al. Video grammetricbased modal identification of onorbit flexible structures[J]. Journal of Harbin Institute of Technology, 2014, 46(11): 1723.
    [11]张聪炫,陈震,黎明.金字塔光流三维运动估计与深度重建直接方法[J].仪器仪表学报, 2015, 36(5): 10931105. ZHANG C X, CHEN ZH, LI M. Direct method for 3D motion estimation and depth reconstructionbased on pyramid optical flow[J]. Chinese Journal of Scientific Instrument, 2015, 36(5): 10931105.
    [12]尹爱军,张泉, 戴宗贤,等. 离面振动光流分析方法研究[J]. 振动与冲击,2016, 35(10): 1823. YIN AI J, ZHANG Q, DAI Z X, et al. Analysis of outofplane vibration using optical flow[J].Journal of Vibration and Shock, 2016, 35(10): 1823.
    [13]SONG X J,SENEVIRATNE L D,ALTHOEFER K. A Kalman filterintegrated optical flow method for velocity sensing of mobile robots[J]. IEEE/ASME Transactions on Mechatronics, 2011, 16(3): 551563.
    [14]BARRON J L, FLEET D J, BEAUCHEMIN S S. Performance of optical flow techniques[J]. International Journal of Computer Vision, 1994, 12(1): 4377.
    [15]BEAUCHEMIN S S, BARRON J L. The computation of optical flow[J]. ACM Computing Surveys(CSUR), 1995, 27(3): 433466.
    [16]HORN B K P, SCHUNCK B G. Determining optical flow[J]. Artificial Intelligence, 1981, 17 (13): 185203.
    [17]MURIN J, AMINBAGHAI M, HRABOVSKY J, et al.Beam finite element for modal analysis of FGM structures[J]. Engineering Structures, 2016, 121(8):118.
    [18]ZHANG Z Y. A flexible new technique for camera calibration[J]. IEEE Transactions on Pattern Analysis & Machine Intelligence, 2000, 22(11): 13301334.
    [19]TSAI R Y. A versatile camera calibration technique for highaccuracy 3D machine vision metrology using offtheshelf TV cameras and lenses[J]. IEEE Journal on Robotics & Automation, 1987, 3(4): 323344.
    [20]刘一凡,蔡振江,索雪松.基于基础矩阵与HEIV模型的双目相机标定[J]. 电子测量与仪器学报,2016,30(9): 14251431. LIU Y F, CAI ZH J, SUO X S. New calibration method of binocular camera based on fundamental matrix&HEIV model[J]. Journal of Electronic Measurement and Instrumentation, 2016, 30(9):14251431.
    相似文献
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

伍济钢,王刚,蒋勉,张双健,王文韫.光流点匹配跟踪的薄壁件振动模态测试方法[J].电子测量与仪器学报,2017,31(6):850-858

复制
分享
文章指标
  • 点击次数:3585
  • 下载次数: 17011
  • HTML阅读次数: 0
  • 引用次数: 0
历史
  • 在线发布日期: 2017-08-02
文章二维码