基于MicroBlaze的激光选通成像控制系统
DOI:
作者:
作者单位:

北京工业大学电子信息与控制工程学院 北京 100022

作者简介:

通讯作者:

中图分类号:

TN2

基金项目:


Lasergated imaging system based on the MicroBlaze
Author:
Affiliation:

Electronic Information and Control Engineering College,Beijing University of technology,Beijing 100022,China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    激光选通成像是一种基于距离选通的激光主动成像技术,通过在不同时间段上选通ICCD接收目标漫反射的激光脉冲进行成像,距离选通控制是整个系统的关键技术。本文以Xilinx公司的Spartan6系列的FPGA作为主控芯片,利用Xilinx公司的MicroBlaze微处理器IP核和其他外设IP核一起,设计了一种可编程片上系统(SOPC),控制FPGA选通控制逻辑电路完成对激光成像的选通控制。测试结果表明,该系统能够很好地完成对激光成像的选通控制,并且能够满足激光选通所需的时序要求。

    Abstract:

    LaserGated imaging is a kind of laser active imaging technology that based on the rangegated, through gated ICCD receives the reflection of the laser pulse from target at different times to imaging, and rangegated is the key technology of the system. In this paper, using the Xilinx’s FPGA that is the series of Spartan6 as main control chip, and using Xilinx’s MicroBlaze microprocessor IP core and other peripherals IP core, designed a kind of system on programmable chip (SOPC) to complete the strobe control of the laser imaging. The test results show that the system can complete the gated control of laser imaging, and can satisfy the timing requirements for the laser gated.

    参考文献
    相似文献
    引证文献
引用本文

苏晋海,赵德群,段建英,陈鹏宇.基于MicroBlaze的激光选通成像控制系统[J].国外电子测量技术,2016,35(10):91-95

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-11-23
  • 出版日期: